RFXCOM Plugin
This plugin interfaces the RFXtrx433 and RFXrec433* from
RFXCOM in Indigo as an transmitter and receiver for a
large number of protocols. See also
http://rfxcom.com/transceivers.htm.
Supported Protocols
The plugin supports the following 433MHz wireless protocols:
- Visonic
- Domia/ARC
- X10 (European only)
- Somfy RTS (up to 40 RTS devices)
- Blyss
- Oregon Scientific
- Aidebao security
- ATI Remote Wonder
- ATI Remote Wonder Plus
- ATI Remote Wonder II
- ANSLUT (learning mode)
- Byron SX chime
- ByeByeStandBy
- Brel blind motors
- cent-a-meter
- Chacon (learning mode)
- Chacon (with address code wheels)
- Chuango security sensors
- CoCo (learning mode)
- CoCo (with address code wheels)
- DI.O (learning mode)
- DI.O (with address code wheels)
- Dooya blind motors
- Ebode
- ELRO AB400,AB600
- ESMO blind motors
- Everflourish EMW100
- Harrison curtain
- Hasta new blind motors
- HomeEasy UK (learning mode)
- HomeEasy UK (with address code wheels)
- Intertechno (learning mode)
- Intertechno (with address code wheels)
- JVS screens
- Kerui security sensors
- KlikAanKlikUit (learning mode)
- KlikAanKlikUit (with address code wheels)
- LightwaveRF
- Livolo aplliance & dimmer
- Louvolite one touch motorised blinds
- Maverick ET-732/733 BBQ/Smoke temperature
- MDremote 106 LED dimmer
- Meiantech security sensors
- Mertik Maxitrol Fire Place controllers
- NEXA (learning mode)
- NEXA (with address code wheels)
- OWL – CM113,CM119,CM160
- Quotidom blind motors
- RFXSensor
- RFXMeter
- TRC02 RGB LED strip driver
- RohrMotor24 RMF blind motors
- RollerTrol R-series blind motors
- Simu RTS blind motors
- YOODA blind motors
- X10 PC Remote
- Xdom
Downloading for use
Click the releases link above and download the release you’re interested in.
Once downloaded to your Indigo Server Mac, double-click the .indigoPlugin file
to install.
How to use
Mac OS X Mavericks and above include the required FTDI driver, but previous
versions will require you to install the driver which can be downloaded from
their website.
Once you have the driver installed, enable the debug log in the configuration
and open the event log to see which devices are received. Add the devices as
instructed in the event log.
Getting Help
If you have questions, the best place to start is on the RFXCOM
forum on our forums.
Plugin ID
Here's the plugin ID in case you need to programmatically restart the plugin:
Plugin ID: com.indigodomo.opensource.isybridge
Contributing
If you want to contribute, just clone the repository in your account, make your
changes, and issue a pull request. Make sure that you describe the change you're
making thoroughly - this will help the repository managers accept your request
more quickly.
Terms
Indigo Domotics is hosting the repository and will do minimal management.
Unless a pull request has no description or upon cursory observation has some
obvious issue, pull requests will be accepted without any testing by us. We may
choose to delegate commit privledges to other users at some point in the future.
We (Indigo Domotics) don't guarantee anything about this plugin - that
this plugin works or does what the description above states, so use at your own
risk. Support will continue to be provided by RFXCOM through the RFXCOM forum
mentioned above.
v3.0.2 |
Requires Indigo v2022.1.0+
|
Released Nov. 18, 2022 |
RFXCOM Plugin v3.0.2 |
Changes in this release
- Bug fix for unhandled device not being bytestring (was being sent via function with a %s command
- Re-add some Ord for reading of device information from Indigo Devices.
- Update plugin to Python 3 API Version
- Add Device Setting to Reverse Actions
- Continued changes supporting Dimmer
- Add Blinds T1234 Device Option to convert Brightness level settings to On/Off [Avoids breaking BlindsT1234 that support dimmerValues]
- Convert all BlindsT1234 Devices to Dimmers so that natively supported as Blinds in Alexa Native plugin.py
- Fix handlSecurity typo
- Add blindState to BlindsT1234 device - Open/Closed/or Partial
- Update lastcommand and lastUpdate to include both remote commands, but also Sent commands below for Subtype=3 Motorlux Blinds ONLY:
• Add warning message for Blinds subtype=3 may not receive unitcode and will need to be entered for control manually
• Because all unitcodes are sent as 1, any same physical remote devices with different unitcodes/channels will be updated together incorrectly)
• Ideally in this scenario should use a different physical remote for groups of blinds wish to control/be correctly updated in Indigo
- Add action Groups Open/Close/Stop/Program/Limit for all BlindsT1234 devices
(obviously all may not work correctly on all devices - but option exists)
- Add new device type BlindsT1234 for all type=25 Blinds (should replace A-OK AC114, Brel, and others, these others left alone so can update as wanted)
- Add Support for Dooya Blinds and Remotes (Receive Remote commands and send commands)
- Add Support for SilentGliss Blinds (Receive Remote commands and send commands)
- Add Support for Motorlux Subtype=3 Blinds - NB: no unitcodes received, see details in Commit 2.2.3
- Correctly shows Housecode, unitcode and subtype for ALL these Blinds Remotes
- Correctly updates On/Off state of device if command sent via Indigo, OR if Remote button pressed
- Add subtype to device Def (should allow other blinds to be controlled)
- Add last Command received to device State, lastupdated and type
v2.1.16 |
Requires Indigo v7.0.2 thru v2022.2 |
Released Oct. 24, 2018 |
RFXCOM Plugin v2.1.16 |
Release details
Released on: |
Oct. 24, 2018 |
Requires: |
Indigo
v7.0.2
thru v2022.2 |
Downloaded: |
2 times |
Download this release
|
Changes in this release
- Fixed bug that caused error reports for duplicate device
v2.1.15 |
Requires Indigo v7.0.2 thru v2022.2 |
Released Sept. 15, 2018 |
RFXCOM Plugin v2.1.15 |
Release details
Released on: |
Sept. 15, 2018 |
Requires: |
Indigo
v7.0.2
thru v2022.2 |
Downloaded: |
0 times |
Download this release
|
Changes in this release
- Fixed RFXCOM temp sensor and sensorValueType errors.
v2.1.14 |
Requires Indigo v7.0.2 thru v2022.2 |
Released Sept. 10, 2018 |
RFXCOM Plugin v2.1.14 |
Release details
Released on: |
Sept. 10, 2018 |
Requires: |
Indigo
v7.0.2
thru v2022.2 |
Downloaded: |
0 times |
Download this release
|
Changes in this release
- Fixed bug that caused a "tUnits not defined" error.
v2.1.13 |
Requires Indigo v7.0.2 thru v2022.2 |
Released June 2, 2018 |
RFXCOM Plugin v2.1.13 |
Changes in this release
- Fixed bug caused by missing MultiplyBatteryLevel device state.
v2.1.12 |
Requires Indigo v7.0.2 thru v2022.2 |
Released May 20, 2018 |
RFXCOM Plugin v2.1.12 |
Changes in this release
- Added configuration option to set # of digits stored in state values and displayed in the status column for Temperature, Rain values and Wind values.
- Fixed a bug that rarely occurred at midnight during counter resets.
v2.1.11 |
Requires Indigo v7.0.2 thru v2022.2 |
Released April 13, 2018 |
RFXCOM Plugin v2.1.11 |
Release details
Released on: |
April 13, 2018 |
Requires: |
Indigo
v7.0.2
thru v2022.2 |
Downloaded: |
0 times |
Download this release
|
Changes in this release
- Fixed bug that caused temperature sensor values to not display in status column of main window.
v2.1.10 |
Requires Indigo v7.0.2 thru v2022.2 |
Released April 9, 2018 |
RFXCOM Plugin v2.1.10 |
Release details
Released on: |
April 9, 2018 |
Requires: |
Indigo
v7.0.2
thru v2022.2 |
Downloaded: |
0 times |
Download this release
|
Changes in this release
- Fixed bug temperature sensor updating bug.
v2.1.8 |
Requires Indigo v7.0.2 thru v2022.2 |
Released March 19, 2018 |
RFXCOM Plugin v2.1.8 |
Release details
Released on: |
March 19, 2018 |
Requires: |
Indigo
v7.0.2
thru v2022.2 |
Downloaded: |
0 times |
Download this release
|
Changes in this release
- Fixed bug that prevented energy, gas and water meter values from being reset at midnight.
v2.1.7 |
Requires Indigo v7.0.2 thru v2022.2 |
Released March 9, 2018 |
RFXCOM Plugin v2.1.7 |
Release details
Released on: |
March 9, 2018 |
Requires: |
Indigo
v7.0.2
thru v2022.2 |
Downloaded: |
0 times |
Download this release
|
Changes in this release
- Added minmax for yesterday device states for temperature and humidity.
- Added reset sensor menu option (only currently implemented for rain sensor).
- Fixed min/max setting at midnight bug.
- Optimizations (more batching) of how often device states are updated.
v2.1.3 |
Requires Indigo v7.0.2 thru v2022.2 |
Released Jan. 9, 2018 |
RFXCOM Plugin v2.1.3 |
Changes in this release
- Added support for blinds: A-OK RF01, AC114 and AC123 / Motorlux (BlindsT2 / BlindsT3).
- Added uiValue to _addToBatchStatesChange
- Added degree symbol to temperature sensor uiValue, changed it to unicode
- Added possibility to multiply battery level by 10
- Changed temperature device to inherit from indigo sensor, instead of custom device (many dialog device filters use "indigo.sensor" as filter, causing the RFXCOM temperature sensors to previously not be listed)
- Changed temperature device definition including removing status request button. Added code to deviceStart to account for missing/wrong pluginProps on plugin update
v2.1.2 |
Requires Indigo v7.0.2 thru v2022.2 |
Released June 10, 2017 |
RFXCOM Plugin v2.1.2 |
Release details
Released on: |
June 10, 2017 |
Requires: |
Indigo
v7.0.2
thru v2022.2 |
Downloaded: |
129 times |
Download this release
|
Changes in this release
This version is another attempt to fix the temperature sensor states not updating issue.
v2.1.1 |
Requires Indigo v7.0.2 thru v2022.2 |
Released June 2, 2017 |
RFXCOM Plugin v2.1.1 |
Release details
Released on: |
June 2, 2017 |
Requires: |
Indigo
v7.0.2
thru v2022.2 |
Downloaded: |
15 times |
Download this release
|
Changes in this release
This version fixes a bug introduced in 2.1.0 that caused temperature sensors to sometimes not have their device state values updated correctly.
v2.1.0 |
Requires Indigo v7.0.2 thru v2022.2 |
Released Dec. 6, 2016 |
Initial release supporting Indigo 7 |
Release details
Released on: |
Dec. 6, 2016 |
Requires: |
Indigo
v7.0.2
thru v2022.2 |
Downloaded: |
198 times |
Download this release
|
Changes in this release
Initial release supporting Indigo 7
v1.6.3 |
Requires Indigo v5.0.0 thru v2022.2 |
Released Dec. 6, 2016 |
Last release for Indigo 5/6 |
Changes in this release
Last release for Indigo 5/6.